[download link=”https://www.mydatec.com/wp-content/uploads/2018/10/PUITS-CANADIEN_19102018.pdf”]See the technical data sheet for the CANADIAN WELL range[/download]

How does the hydraulic well work and what are the benefits?

Optimize the performance of your ventilation system by recovering calories or frigories from the ground, using a water/air coil and a water loop buried in the ground (geothermal collector). Benefit from automatic system regulation, controlled by touch screen.

Well page on the touch screen

Advantages of the Canadian well

• Autonomous regulation
• Double flow and thermodynamic double flow compatible
• Visualization of the number of hot and cold operating hours and
  thermal performance of the hydraulic Canadian well

Compliance

• Passive airtight houses
• BEPOS / RT2012

Field of application

• Housing (new or renovation)

Implementation

• To be placed on the fresh air inlet duct of the double flow ventilation.
• Ready-to-install kit (buried collector + glycol + fittings)
• Power supply 230VAC (1.5mm²)
• Screen connection 4 wires 0.5mm² (12V + Modbus link)
  from the Canadian well

Description

	MODES OF THE HYDRAULIC CANADIAN WELL
	Break
	Hot Mode
	Cold mode
	Anti-seize mode
	PARAMETER PAGES
	Temperature instructions page
	Page of the visualization of the operating times
	Adjustment of page parameters
	Information / Help

MyDATEC range

Technical characteristics of the MyDatec Canadian well

Air Pressure Drop of the G-2000 Hydraulic Heat Pump

Technical specifications

* Assumptions

Clay soil saturated with water
Climatic zone : H2d
Sensor 100 ml
Sensor depth 4m
Air flow : 400 m3/h
Heating Well Set Point: 18°C
Cooling Well Setpoint: 22°C